Blog
- Details
- Parent Category: Projects
- Category: Home Automation
- Hits: 13546
Internet of Things, Zigbee, Z-Wave, X10, MQTT, nodes, pairing! What is all of this? In this article, I'm going to go over the common language of home automation and try to help you make sense of all of these terms and concepts. *NOTE* this article is alive and will change as time goes by.
- Details
- Parent Category: Projects
- Category: Completed Projects
- Hits: 37738
Since buying my printer early last year, I've had a lot of questions about it, like 'where to get one', 'how good is it compared to others' and 'what kind of prints can I get out of it'. What follows comes from numerous emails and private messages with folks over the last year and a half. This document will change as I find new useful info.
- Details
- Parent Category: Projects
- Category: Home Automation
- Hits: 8478
As I mentioned in the introduction article of this series, there isn't a standard yet for smart home devices to talk to each other. However, the advertising and hype sure makes smart homes look like an easy care free way of life. Well, it isn't. If someone is telling you it is, beware! Snake oil will soon follow!
- Details
- Parent Category: Projects
- Category: Home Automation
- Hits: 7510
Since February of this year, I've been working on a lengthy project - I am slowly adding digital control and automation to the everyday things in our home. This project, unlike most of the others I've started grew out of a need rather than a want. Sure, the want is there and I'd be lying if I said that this wasn't one of the most fun projects I've committed to but, in this case, this project started with attempting to fill a need. Now that this project has matured a bit, I want to start chronicling my journey so that others with a similar need may find these experiments useful.
- Details
- Parent Category: Projects
- Category: Robotic Arm V2
- Hits: 8758
As I started brainstorming for version 2 of the arm, it became clear that I would need to make some changes so, I upgraded the electronics of my original robotic arm. This will allow me to create more modes of operation and create an I2C secondary interface.
- Details
- Parent Category: Projects
- Category: Weather Station
- Hits: 8867
It has been over a year and I feel like I have a decently tested version to post. It has been a learning experience to be sure and I am already working on some changes for the official version 1 of this monstrosity. In the meantime, here is My Backyard Weather, beta 1.
- Details
- Parent Category: Projects
- Category: Weather Station
- Hits: 10218
Let me make this clear, the 'Beginner' mentioned in this post isn't you, it's me! This weather beginner has built a prototype weather station and in the 2 months it has been up, I've learned a lot. I have learned that some of my ideas weren't so crazy and I learned that some of the things I took for granted were way off base.
So, call this a beta, a prototype version or whatever you like, just don't call it finished. Here I present to you my lessons learned on the way to stable state.
- Details
- Parent Category: Projects
- Category: Weather Station
- Hits: 7054
Overview
I've always wanted to build a weather station. I have an interest in weather science but, for me a weather station is all of the stuff I like about electronics - real world use of remote sensing that can be used for practical stuff. From home automation to gardening to knowing what's in the air, local weather and environmental sensing can be used to make subtle cumulative changes that add up to better health and lower bills.
- Details
- Parent Category: Projects
- Category: Robotic Arm V2
- Hits: 7521
Overview
I am working on an upgrade of my Robotic Arm Project that has managed to survive two years worth of kid interactions over the course of many different events. To say I am surprised at its longevity is an understatement.
- Details
- Parent Category: Projects
- Category: Completed Projects
- Hits: 17222
I'm not much of a gamer. When I was a kid, I had a space invaders handheld game, a Coleco Telstar Colortron, and a Tandy Color Computer 2. Although the COCO2 had program cartridges, most of the games I played on it were typed in from a game code book my parents gave me with the computer. That may sound like I must have been motivated to play the games (to spend all that time typing them in) but in reality, I was more interested in seeing how they worked than I was in playing them.
- Details
- Parent Category: Thoughts
- Category: Rants
- Hits: 4696
For years, politicians promised much but delivered little and people became more and more disillusioned and disenfranchised. In response, new politicians seized on this growing public anger and not only promised to fix it but also promised to undo and prevent "the other side" from doing anything else. Thus, we see the erosion of cooperation and consensus building.